Jump to content

White catalyst

From Wikipedia, the free encyclopedia
White Catalyst
Names
IUPAC name
2-(benzenesulfinyl)ethylsulfinylbenzene;palladium(2+);diacetate
Identifiers
3D model (JSmol)
ChemSpider
ECHA InfoCard 100.204.517 Edit this at Wikidata
EC Number
  • 679-536-8
  • InChI=1S/C14H14O2S2.2C2H4O2.Pd/c15-17(13-7-3-1-4-8-13)11-12-18(16)14-9-5-2-6-10-14;2*1-2(3)4;/h1-10H,11-12H2;2*1H3,(H,3,4);/q;;;+2/p-2
    Key: SNNYSJNYZJXIFE-UHFFFAOYSA-L
  • c0ccccc0S(=O)CCS(=O)c0ccccc0.O=C(C)O[Pd]OC(C)=O
Properties
C18H20O6PdS2
Molar mass 502.89 g·mol−1
Appearance Red-brown solid
Hazards
GHS labelling:
GHS05: Corrosive
Danger
H318
P280, P305+P351+P338, P310
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).
checkY verify (what is checkY☒N ?)

The White catalyst is a transition metal coordination complex named after the chemist by whom it was first synthesized, M. Christina White, a professor at the University of Illinois. The catalyst has been used in a variety of allylic C-H functionalization reactions of α-olefins. In addition, it has been shown to catalyze oxidative Heck reactions.

Preparation

[edit]

This compound is commercially available. It may be prepared by oxidation of 1,2-bis(phenylthio)ethane to the sulfoxide, followed by reaction with palladium acetate.[1]

Mechanism of allylic C-H acetoxylation

[edit]

The reaction mechanism of allylic C-H acetoxylation has been studied.[2] The first step in the catalytic cycle is cleavage of the allylic C-H bond. The sulfoxide ligand is thought to promote this step by generating a highly electrophilic, possibly cationic palladium species in situ. This species coordinates to the alkene and acidifies the adjacent C-H bond, which allows acetate to abstract the proton and forms a π-allyl palladium complex (II). Subsequently, a π-acid such as benzoquinone coordinates to the palladium, activating the π-allyl complex to nucleophilic attack (III). A nucleophile, in this case acetate, attacks to reductively eliminate palladium, generating the product and palladium(0) (IV). The palladium(0) is reoxidized to palladium(II) by benzoquinone and the sulfoxide ligand reassociates, closing the catalytic cycle.

Allylic Esterification Catalytic Cycle
Allylic Esterification Catalytic Cycle

Allylic esterification

[edit]

The White catalyst was originally developed for use in a branched allylic acetoxylation reaction.[2] An enantioselective version of this reaction was subsequently reported, using chromium(III) salen fluoride as a chiral cocatalyst.[3] A macrolactonization reaction based on the branched allylic esterification was developed for the preparation of 14- to 19-membered macrolides.[4] This method was applied to the total synthesis of 6-deoxyerythronolide B.[5] In addition to acetate, a wide variety of carboxylic acids may be employed as nucleophiles in the branch allylic esterification reaction. As the first step in an esterification/Heck sequence, aliphatic and aromatic carboxylates were demonstrated, including amino acids.[6]

Allylic Esterification Reaction Scheme
Allylic Esterification Reaction Scheme

Allylic amination

[edit]

The White catalyst can effect both branched and linear regioselective allylic C-H aminations. In order to promote nucleophilic attack at the internal terminus of the π-allyl to generate branched product, a tethered N-sulfonyl carbamate nucleophile is used. This strategy has been applied to the synthesis of 1,2 and 1,3-amino alcohols.[7][8] The amination proceeds with high yields and good diastereoselectivity, and the products may be readily elaborated to amino acids and other synthetic intermediates and natural products. Key to the development of the reaction was identification of a very acidic nitrogen nucleophile with a pKa close to acetic acid, as more basic nucleophiles divert reactivity to aminopalladation. The intermolecular version of the allylic C-H amination is also known.[9] Using methyl N-tosyl carbamate nucleophile, the linear E-allylic amine products are obtained from α-olefin substrates. It has been shown that functionalization of the π-allyl intermediate may be promoted by chromium(III) salen chloride activation of the electrophile, or Hunig's base activation of the nucleophile.[10]

Allylic Amination Reaction Scheme
Allylic Amination Reaction Scheme

Allylic alkylation

[edit]

In 2008, simultaneous publications described the allylic C-H alkylation of allylarene substrates.[11][12] These reactions were catalyzed by the White catalyst or by an earlier version of the complex bearing benzyl substituents on the sulfoxide in place of phenyl. It was demonstrated that an additional sulfoxide ligand, dimethylsulfoxide (DMSO), was essential for promoting functionalization of the π-allyl intermediate; the bis-sulfoxide ligand alone was unable to complete the catalytic cycle.

Allylic Alkylation Reaction Scheme
Allylic Alkylation Reaction Scheme

Heck reaction

[edit]

The White catalyst has been found to be an effective catalyst for an oxidative version of the classic Heck reaction. Rather than performing allylic C-H cleavage—a relatively slow process—the catalyst quickly transmetallates with a boronic acid. This aryl palladium intermediate undergoes a 1,2-addition across the alkene double bond. β-Hydride elimination releases the product. The oxidative Heck was originally reported as a sequential process following allylic C-H esterification.[6] It was subsequently demonstrated as a stand-alone method for a broad range of α-olefin substrates.[13] The regioselectivity of the reaction is controlled by directing groups such as carbonyls, alcohols and amines.

Oxidative Heck Reaction Scheme
Oxidative Heck Reaction Scheme

References

[edit]
  1. ^ Kenneth J. Fraunhoffer & M. Christina White (2007). "syn-1,2-Amino Alcohols via Diastereoselective Allylic C-H Amination". J. Am. Chem. Soc. 129 (23): 7274–7276. doi:10.1021/ja071905g. PMC 2720786. PMID 17516648.
  2. ^ a b Chen, M. S.; Prabagaran, N.; Labenz, N. A.; White, M. C. (2005). "Serial Ligand Catalysis: A Highly Selective Allylic C-H Oxidation". J. Am. Chem. Soc. 127 (19): 6970–6971. doi:10.1021/ja0500198. PMID 15884938.
  3. ^ Covell, D. J.; White, M. C. (2008). "A Chiral Lewis Acid Strategy for Enantioselective Allylic C-H Oxidation". Angewandte Chemie International Edition. 47 (34): 6448–6451. doi:10.1002/anie.200802106. PMC 2720790. PMID 18624317.
  4. ^ Fraunhoffer, K. J.; Prabagaran, N.; Sirois, L. E.; White, M. C. (2006). "Macrolactonization via Hydrocarbon Oxidation". J. Am. Chem. Soc. 128 (28): 9032–9033. doi:10.1021/ja063096r. PMC 2720785. PMID 16834366.
  5. ^ Stang, E. M.; White, M. C. (2009). "Total synthesis and study of 6-deoxyerythronolide B by late-stage C–H oxidation". Nature Chemistry. 1 (7): 547–551. Bibcode:2009NatCh...1..547S. doi:10.1038/NCHEM.351. PMC 3274347. PMID 21378935.
  6. ^ a b Delcamp, J. H.; White, M. C. (2006). "Sequential Hydrocarbon Functionalization: Allylic C-H Oxidation/Vinylic C-H Arylation". J. Am. Chem. Soc. 128 (47): 15076–15077. doi:10.1021/ja066563d. PMID 17117844.
  7. ^ Fraunhoffer, K. J.; White, M. C. (2007). "syn-1,2-Amino Alcohols via Diastereoselective Allylic C-H Amination". J. Am. Chem. Soc. 129 (23): 7274–7276. doi:10.1021/ja071905g. PMC 2720786. PMID 17516648.
  8. ^ Rice, G. T.; White, M. C. (2009). "Allylic C-H Amination for the Preparation of syn-1,3-Amino Alcohol Motifs". J. Am. Chem. Soc. 131 (33): 11707–11711. doi:10.1021/ja9054959. PMC 2751616. PMID 19645489.
  9. ^ Reed, S. A.; White, M. C. (2008). "Catalytic Intermolecular Linear Allylic C-H Amination via Heterobimetallic Catalysis". J. Am. Chem. Soc. 130 (11): 3316–3318. doi:10.1021/ja710206u. PMC 2720796. PMID 18302379.
  10. ^ Reed, S. A.; Mazzotti, A. R.; White, M. C. (2009). "A Catalytic, Brønsted Base Strategy for Intermolecular Allylic C-H Amination". J. Am. Chem. Soc. 131 (33): 11701–11706. doi:10.1021/ja903939k. PMC 2751613. PMID 19645492.
  11. ^ Young, A. J.; White, M. C. (2008). "Catalytic Intermolecular Allylic C-H Alkylation". J. Am. Chem. Soc. 130 (43): 14090–14091. doi:10.1021/ja806867p. PMID 18831588.
  12. ^ Lin, S.; Song, C.-X.; Cai, G.-X.; Wang, W.-H.; Shi, Z.-J. (2008). "Intra/Intermolecular Direct Allylic Alkylation via Pd(II)-Catalyzed Allylic C-H Activation". J. Am. Chem. Soc. 130 (39): 12901–12903. doi:10.1021/ja803452p. PMID 18778061.
  13. ^ Delcamp, J. H.; Brucks, A. P.; White, M. C. (2008). "A General and Highly Selective Chelate-Controlled Intermolecular Oxidative Heck Reaction". J. Am. Chem. Soc. 130 (34): 11270–11271. doi:10.1021/ja804120r. PMID 18671350.